- Dessin technique
- Technical data
- Rotating image
- Téléchargements
| Protection class | -- |
| Housing material | Aluminium AlMgSi1 (3.2315) |
| Water supply | Hose G1/8” clearance Ø9 mm (MS) |
| Particles | No particles > 100 µm |
| Max. water pressure | 4 bar |
| Recommended flow rate | 1.6 l/min |
| Cooling medium | pH neutral It is exclusively for use coolant that the materials of the cooling valve do not attack |
| Weight | 3.03 kg |
| Relative humidity | The temperature of the coolant should be chosen so that at the imatic conditions at the site not the dew point falls below (non-condensing conditions). |
| Accessories | Spanner wrench, O-ring, data sheet |
| Note | It`s recommend to use a particulate filter |
Mechanical accessories for CellaTemp PA
Cooling jacket, sealed
PA 20/M AF 3
