PA 20/M AF 1 Cooling jacket, sealed

Technical drawing
Technical data
Rotating image
Downloads

Protection class	--
Housing material	Aluminium AlMgSi1 (3.2315)
Water supply	Hose G1/8” clearance Ø9 mm (MS)
Particles	No particles > 100 µm
Max. water pressure	4 bar
Recommended flow rate	1.6 l/min
Cooling medium	pH neutral It is exclusively for use coolant that the materials of the cooling valve do not attack
Weight	2.978 kg
Relative humidity	The temperature of the coolant should be chosen so that at the imatic conditions at the site not the dew point falls below (non-condensing conditions).
Accessories	Spanner wrench, O-ring, data sheet
Note	It`s recommend to use a particulate filter

Drawings

Drawing PA 20 M AF1 E

3 MB

Drawing PA 20 M AF1 E

Drawing PA 20 M AF1

1 MB

Drawing PA 20 M AF1

3D CAD model

CAD PA 20 M AF1

226 KB

CAD PA 20 M AF1

CAD PA 20 M AF1
556 KB

CAD PA 20 M AF1

Mechanical accessories for CellaTemp PA

Cooling jacket, sealed
PA 20/M AF 1

The lockable cover on the back of the housing provides a weather-tight enclosure of the pyrometer. The assembly / disassembly of the pyrometer is easy because this only the snaps the lid can be opened.

Mechanical accessories for CellaTemp PA

Cooling jacket, sealed PA 20/M AF 1

Cooling jacket, sealed
PA 20/M AF 1